Specifications - Sony Bravia XBR-84X900 Mode D'emploi

Specifications

System
Television system
Channel coverage
Panel system
Speaker output
Input/Output jacks
CABLE/ANTENNA
VIDEO IN 1
COMPONENT IN
VIDEO IN 2
HDMI IN 1/2/3/4
(Only HDMI 2 and HDMI 3
support 4K resolution)
AUDIO OUT/Headphones
DIGITAL AUDIO OUT
(OPTICAL)
PC IN
PC/HDMI 3 AUDIO IN
LAN
USB/DLNA
REMOTE
NTSC: American TV standard
ATSC (8VSB terrestrial): ATSC compliant 8VSB
QAM on cable: ANSI/SCTE 07 2000 (Does not include CableCARD functionality)
Analog terrestrial: 2 - 69 / Digital terrestrial: 2 - 69
Analog Cable: 1 - 135 / Digital Cable: 1 - 135
LCD (Liquid Crystal Display) Panel
12.5 W + 12.5 W + 12.5 W + 12.5 W
75-ohm external terminal for RF inputs
Video / Audio input (phono jacks)
YP P (Component Video): 1080p (60 Hz), 1080i (60 Hz), 720p (60 Hz), 480p, 480i
B R
Audio input (phono jacks)
Video input (common phono pin with Y input)
Video (2D):
HDMI 1, 4: 1080p (30, 60 Hz), 1080/24p, 1080i (60 Hz), 720p (30, 60 Hz), 720/24p,
480p, 480i, PC Formats
HDMI 2, 3: 3840 × 2160p (24, 25, 30 Hz), 4096 × 2160p (24 Hz), 1080p (30, 60 Hz),
1080/24p, 1080i (60 Hz), 720p (30, 60 Hz), 720/24p, 480p, 480i,
PC Formats
Video (3D):
Frame Packing 1080p (30 Hz), 1080/24p, 1080i (60 Hz), 720p (30, 60 Hz), 720/24p
Side-by-Side 1080p (60 Hz), 1080/24p, 1080i (60 Hz), 720p (60 Hz)
Over-Under 1080p (30, 60 Hz), 1080/24p, 1080i (60 Hz), 720p (60 Hz)
Audio: Two channel linear PCM: 32, 44.1 and 48 kHz, 16, 20 and 24 bits, Dolby Digital
Analog audio input (stereo mini jack) (HDMI IN 3 only, common with PC IN)
ARC (Audio Return Channel) (HDMI IN 1 only)
Stereo mini jack
Digital optical jack (Two channel linear PCM, Dolby Digital)
Analog RGB (Mini D-sub 15-pin)
Audio input (stereo mini jack) (common with HDMI IN 3)
10BASE-T/100BASE-TX connector (Connection speed may differ depending on the
network environment. 10BASE-T/100BASE-TX communication rate and
communication quality are not guaranteed for this TV.)
Refer to the i-Manual for supported format.
RS232C, D-sub 9 pin.
This jack is for receiving the external control signal.
(Continued) 43
US
US