Hoover CRUISE BH52200 Mode D'emploi page 21

Maintenance:
Removing blockages from the Powered Nozzle.
1
WARNING
!
Risk of personal injury – the brush roll may suddenly restart. Turn power
switch Off and remove the battery before cleaning or servicing the brush roll.
The brush roll should be removed
from the Powered Nozzle before
attempting to remove any
blockages. Carefully use scissors
to remove any threads or hair from
around the brush roll and clear any
dirt or debris from Powered Nozzle.
Removing blockages from the Reach Wand.
To test for a blockage in the Reach Wand,
drop a small ball of paper into the wand.
The paper will drop through if the wand is
clear. Use a broom handle or similar blunt
object to remove any blockage.
2
LUBRICATION
The motor and brush roll are equipped with bearings which
contain sufficient lubrication for their lifetime. The addition of
lubricant could cause damage. Do not add lubricant to motor
or brush roll.
Any other servicing should be done by an authorized service
representative. If appliance is not working as it should, has
been dropped, damaged, left outdoors, or dropped into water,
take it to a service center prior to continuing use.
21