Changing Cycles And Settings - Whirlpool duet W10293937B Guide De Démarrage Rapide

To unlock:
Press and hold the SIGNAL button for 3 seconds to turn this
feature off.
NOTE: When the dryer is running and Control Lock is on, the
dryer can be stopped by pressing the START/PAUSE button,
but cannot be restarted until the control is unlocked.

Changing Cycles and Settings

On Automatic Cycles, you can change the Cycle or Dryness Level
at any time before pressing START/PAUSE.
On Timed Cycles, you can change the Cycles, adjust the time,
or change the temperature setting at any time before pressing
START/PAUSE.
■ Three short tones sound if an unavailable combination is
selected. The last selection will not be accepted.
Changing cycles after pressing START/PAUSE
1. Press POWER. This ends the current cycle.
2. Select the desired cycle and options.
3. Press and hold START/PAUSE. The dryer starts at the
beginning of the new cycle.
NOTE: If you do not press Start within 5 minutes of selecting
the cycle, the dryer automatically shuts off.
Changing settings on Timed Cycles during the cycle
On Timed Cycles, at any time, you may:
■
Adjust the time by pressing the More or Less Time buttons.
■
Change the temperature setting by pressing the Temp button.
8
Retractable Hanging Rod
The retractable hanging rod may be used to hang several items of
clothing.
To open or close the hanging rod, push it in until you hear it click.