Light Signals Table; Maintenance - Navkom Bioreader X Instructions D'utilisation

All manuals and user guides at all-guides.com
LED BEEP
White+red Yes
White No
White Yes
White No
White No
Green Yes
White No
Red Yes
Red Yes
Red Yes
Green+white No
Green+red Yes
Green+red No
White+red No
White+red Yes
From time to time, a fingerprint reader should be wiped clean with a dry or slightly damp cloth; apart from that it does not need
special maintenance. A dirty fingerprint reader can cause problems with the recognition of fingerprints!
Never clean with aggressive cleaners, polishing pastes or acids! Cleaning or scrubbing of fingerprint reader's surface
with hard and sharp objects can result in damaged reader or device malfunction and, consequently, the loss of warranty
entitlement.
EN
14
STATUS FREQUENCY
On
On
Continuously
On
Flashing quickly
Flashing slowly Until timeout
Flashing
Off
Flashing Continuously
Flashing
On
Flashing
Until timeout
alternately
Flashing
simultaneously
Flashing
Until timeout
alternately
Flashing
Until timeout
alternately
Flashing
simultaneously

9. LIGHT SIGNALS TABLE

1s Bioreader has been connected to power and initializes.
Bioreader is in standby mode, waiting for a fingerprint or trig-
---
gering of any function.
The function of adding the remote control is on, press any
10 s button on the remote.
Bioreader is waiting for choosing a relay; for the relay #1 press
--- button A, for the relay #2 press button B, for both relays press
button C.
Bioreader is waiting for an administrator's finger
(administrator enrol, add user, or delete the entire fingerprint
database).
•
The administrator or user was identified.
•
1 x 1s The administrator's or user's fingerprint was successfully
stored in the database.
•
In strong light the white LED is not visible.
---
•
Device malfunction.
Device malfunction.
•
The administrator or user was not identified.
•
3 x The fingerprint was not stored in the database.
•
Timeout of a function.
3 s Fingerprint database is full.
Bioreader is waiting for a user's fingerprint
(enrol user finger function).
3 x Bioreader has successfully deleted user finger.
Bioreader is waiting for a user fingerprint
(delete user finger function).
Bioreader is waiting for an administrator fingerprint
(to delete the entire database).
Bioreader has successfully deleted the entire fingerprint da-
5 x
tabase.

10. MAINTENANCE

EXPLANATION