Operation - Kuppersbusch IKE3390-2 Notice D'utilisation

OPERATION

Control Panel
ON/OFF button
1
Display
2
Temperature warmer button
3
Temperature colder button
4
OK button
5
Functions button
6
It is possible to change predefined sound of
buttons to a louder one by pressing
together the Functions button and
Temperature colder button for some
seconds. Change is reversible.
Display
A B C D
A) Timer function
B) SuperCooling function
C) IntesiveCooling function
D) DrinksChill function
E) Holiday function
F) ChildLock function
G) Alarm indicator
H) Temperature indicator
Switching on
1. Connect the mains plug to the power
socket.
1
E F G H
2
Functions
6 5 4
2. Press the ON/OFF button if the display
is off.
The alarm buzzer may sound after a few
seconds. If "DEMO" appears on the
display, the appliance is in
demonstration mode. Refer to
"Troubleshooting...".
To reset the alarm refer to "High
temperature alarm".
The temperature indicators show the set
default temperature.
To select a different set
temperature refer to
"Temperature regulation".
Switching off
To switch off the appliance do these steps:
1. Press the ON/OFF button for 5
seconds.
2. The display switches off.
3. To disconnect the appliance from the
power disconnect the mains plug from
the power socket.
Temperature regulation
The default set temperature for the fridge is
+5°C.
Set the temperature of the fridge by
pressing the temperature button.
The temperature indicator shows the set
temperature.
3
5