Scrambler Ducati CROSS-E Mode D'emploi page 12

7. Battery charging and activation
Accessing and activating the battery:
To access the battery, raise the footplate.
To activate the electrical circuit, press the red
button (see photo).
To recharge the battery:
Before charging the electric scooter, make sure you have turned it off.
• Remove the rubber plug from the charging socket located on the right-hand side of the
scooter (A) and insert the end of the adapter (B).
• Plug the other end of the power cord into a power socket (C). The indicator light will turn red
when charging and turn green when the battery is fully charged.
A
CAUTION
C
When the scooter is unfolded it will usually be partially charged.
However, it is advisable to charge it for 6 to 8 hours before using
it for the first time.
It is also recommended to charge it after each use and before
storing it. Do not allow the vehicle to fully discharge to avoid
damaging the battery.
10
B