Cleaning - SilverCrest SFS 150 B3 Instructions D'utilisation Et Consignes De Sécurité

GB

Cleaning

70
NOTICE
► The bag opening must lie smoothly against the suction connectors
the sealing wire . If it does not, the vacuuming and sealing will not work
properly.
♦ Close the appliance lid and then press it down fi rmly on both sides and with
both hands. Thereby, do NOT press the sealing button
being sucked from the bag.
♦ As soon as the air has been sucked from the bag, press and hold the sealing
button with both hands, as already described, and seal the bag. Vacuuming
will not stop automatically as long as the air is still being extracted! The indi-
cation lamp will illuminate during the sealing process.
DANGER
Risk of potentially fatal electrical shock!
► Remove the plug from the mains power socket before beginning to clean
the appliance.
► Ensure that moisture cannot permeate into the appliance during cleaning.
IMPORTANT
Possible damage to the appliance.
► Do not use aggressive or abrasive cleaners as they may damage the
surface of the housing.
► Do not use hard or sharp objects to remove the glue residues from the
sealing wire . If you do, the sealing wire
damaged.
and
. The air is now
or the isolation could be
SFS 150 B3