Kenwood CR-ST80DAB Mode D'emploi page 28

2. Start-up
2.1 Unpacking
Carefully unpack the device and make sure all accessories are present:
• Infrared remote control
• Mains adapter
• Operating instructions
• 2 x AAA/LR03 batteries
• Audio cable 1.5 meters - 3.5mm jack plug
2.2 Connect
• Connect the mains adapter to the radio and to the mains socket.
• Open the battery compartment of the remote control and insert the batteries with correct
polarity.
The specified polarity (+/-) is marked in the battery compartment.
2.3 DAB + / FM telescopic antenna
1. Carefully unlock the antenna on the left side of the casing.
2. Turn the antenna upwards and pull out all the elements completely.
3. Align the antenna for the best reception.
2.4 Remote control
6
Standby On/Off; Alarm clock off
Set snooze
Open/close source selection
Open/close menu
Set alarm clock
3-stage dimmer
Start, pause playback
Select track
Bluetooth coupling; Disconnect
High; FM: Set frequency
Down; FM: Set frequency
Left; step back
Right; Next Step
Confirm input; FM: Search;
Radio image, slide show in full screen mode
Select equalizer preset
Mute, Unmute
Softer / louder