Télécharger Imprimer la page

Honeywell Enviracaire ECM-250i Guide D'utilisation page 6

Publicité

Les langues disponibles

Les langues disponibles

035-02425-000_R0 ECM-250i EFS
FEATURES
A D V A N C E D M I S T
The Advanced Mist
your personal preference. Your humidifier will turn on and off throughout the day
and night to maintain the desired humidity level you have selected.
H O W T O S E T T H E H U M I D I S TAT
First, run the humidifier per the operation instruction with the Humidistat knob set to
its highest setting, turning the knob clockwise
• Let the humidifier run on high for a least one hour or
until your room has reached a comfortable humidity
level.
• At this point, slowly turn your Humidistat knob
counter-clockwise
and the Desired Humidity light comes on (Fig. 5).
• Now that your Humidistat knob is set, the
humidifier will automatically turn back on when your
room drops below your comfort setting and will
automatically turn off again when the setting is
reached.
NOTE: If the humidifier fan will not start or restart when
you select a fan speed, the Advanced Mist
Humidistat may be set too low. Turn the dial
clockwise
will turn Off when the unit is producing moisture (Fig.
5). When the Desired Humidity light turns ON, you
have reached optimal humidity.
N I G H T L I G H T F E AT U R E
The nightlight provides a soothing glow to the water tank.
1. Press the Nightlight button once to start; soft light will illuminate.
2. To turn off, simply press the Nightlight button again.
8/22/03
1:33 PM
H U M I D I S TAT
Humidistat allows you to adjust and select the humidity level to
until the humidifier shuts off
to the end. The Desired Humidity light
Page 6
to the end (Fig. 5).
Fig. 5
Desired
Humidity
Indicator
Nightlight On/Off

Publicité

loading