Honeywell Enviracaire ECM-250i Guide D'utilisation page 5

035-02425-000_R0 ECM-250i EFS
FILLING (CONT'D)
• Place the Motor Housing back into the base.
• Position the Water Tank in the humidifier and push into place. Some water will empty
into the base.
• Once the filled tank has been positioned, do not attempt to move the humidifier. If it
has to be moved, unplug the humidifier and remove the water tank first.
CAUTION: DO NOT POUR WATER INTO THE GRILLE ON TOP OF THE HUMIDIFIER.
DOING SO MAY DAMAGE THE HUMIDIFIER OR CAUSE PERSONAL INJURY.
OPERATION
P O W E R
CAUTION: DO NOT PLUG IN THE HUMIDIFIER WITH WET HANDS AS AN
ELECTRICAL SHOCK COULD OCCUR.
• With the power switch in the OFF position, plug the filled humidifier into a
polarized 120V outlet. DO NOT FORCE THE POLARIZED PLUG INTO THE OUTLET; it
will only fit one way.
M O I S T U R E C O N T R O L
1. Set the fan speed to the desired position (Fig. 4).
HIGH: For fast humidifying
MED: For everyday moisture control
LOW: For quieter nighttime operation
2. Set the Advanced Mist
turning the dial clockwise
(see Fig. 5).
Turn the humidifier OFF if the humidity level feels too
moist or you notice condensation forming on the
walls and/or windows.
I O N I Z E R F E AT U R E
The Ionizer helps freshen the air.
1. Press the Ionizer button once to start; the Ionizer light will illuminate.
(Note: the unit must be turned on for the ionizer to function)
2. To turn OFF the air-freshening Ionizer, simply press the Ionizer button again; the
Ionizer light will turn off.
Note: The Ionizer automatically turns off when the Desired Humidity is reached
(your Desired Humidity light will be on, see Fig. 5). It will turn back on again
when your humidifier fan restarts.
8/22/03 1:33 PM
™
Humidistat on HIGH, by
to the end
Page 5
Fig. 4
Ionizer
Indicator
Ionizer
On/Off
Power
Indicator