schmalz SCPSi-UHV-HD Notice D'utilisation page 73

IO-Link Data Dictionary
21.10.01.00065/02
0x0208 Error E08 disappeared: IO-Link communication interrupted
0x120C Error E12 appeared: Short-circuit at OUT2
0x020C Error E12 disappeared: Short-circuit at OUT2
0x1211 Error E17 appeared: Primary voltage US too high
0x0211 Error E17 disappeared: Primary voltage US too high
0x1212 Error E18 appeared: Input pressure outside operating range
0x0212 Error E18 disappeared: Input pressure outside operating range

Condition Monitoring Warnings
0x1101 CM-Warning: Valve protection activated
0x1102 CM-Warning: Evacuation time t1 above limit [t-1]
0x1104 CM-Warning: Leakage rate above limit [-L-]
0x1108 CM-Warning: H1 not reached in suction cycle
0x1110 CM-Warning appeared: Free-flow vacuum > (H2-h2) but < H1
0x0110 CM-Warning disappeared: Free-flow vacuum > (H2-h2) but < H1
0x1120 CM-Warning appeared: Primary voltage US outside of optimal range
0x0120 CM-Warning disappeared: Primary voltage US outside of optimal range
0x1180 CM-Warning appeared: Input pressure outside of operating range
0x0180 CM-Warning disappeared: Input pressure outside of operating range
J. Schmalz GmbH
J. Schmalz GmbH
Aacher Straße 29, D 72293 Glatten
Tel.: +49(0)7443/2403-0
Fax: +49(0)7443/2403-259
info@schmalz.de
Remains until next suction cycle
Remains until next suction cycle
Remains until next suction cycle
Remains until next suction cycle
10 of 11
SCPSi series
29.08.2014
SCPSi Data Dictionary