Replacing The Motor Filter - Exquisit BP 6102 sw Instructions D'emploi

16.2 Replacing the motor filter

No illustration available.
• Open the floor vacuum
cleaner cover by the latch.
• Remove the floor vacuum
cleaner bag first and then
take the grille off the motor
filter.
• Change the motor filter and
insert the grille and the floor
vacuum cleaner bag again
• with the cover of the floor
vacuum cleaner
CAUTION
Risk of injury!
Improper handling of the vacuum
cleaner can
Lead to injuries.
Switch the vacuum cleaner off
every time before you clean or
maintain it and unplug it from the
receptacle.
Please note: Switch the
appliance off and unplug it every
time before you clean it. For
optimal use of the appliance and
to guarantee a longer life span,
empty the container regularly
and clean its filters.
ATTENTION
- Do not immerse the motor unit,
the plug or the power supply cord
in water or any other liquid.
(Clean it only with a dry cloth.)
- Clean the brushes and nozzles
regularly. Use water and a
sponge, which has been slightly
dipped into a liquid cleaning
agent. Then rinse it off
thoroughly and dry it. Don't use
steel wool or abrasive products.
If the appliance is not being used
for an extended period of time, it
must be covered and placed in a
dry place, in an upright position.
The appliance can be carried by
the handle on the motor unit. It
is recommended that you put it
back into its original packaging in
order to protect it against dust
and humidity.
• If you are no longer using the
appliance, take it out of
operation, disconnect the cord
from the power supply and
secure all parts that constitute a
risk for playing children.
Seite | 31