Cleaning And Maintenance; Replacement Of The Hepa Filter - Exquisit BP 6102 sw Instructions D'emploi

• We recommend the crevice
nozzle for corners that are
hard to reach (accessory).
• For sensitive or formed items
use the brush nozzle.
• In addition, there is an
upholstery nozzle.
• Brush: step on the switch in
order to adjust the position of
the brush to
(accessory). This position is
suitable for parquet and soft
surfaces such as floors or tiles.
For carpets or mats step on
the brush again
• The crevice nozzle is suitable
for corners or places that are
difficult to reach.
• Fully unwind the power cord.
• Plug the appliance into the
receptacle and press the
on/off button.
• When you are using the
appliance make sure that the
flexible hose isn't blocked,
twisted or trapped.
• To switch off the floor vacuum
cleaner, press the button
on/off (5) unplug it from the
receptacle and wind the cord
with the cord rewind button
(7).
• Carry the vacuum cleaner
easily by the handle.
Seite | 30

16 Cleaning and maintenance

16.1 Replacement of the HEPA
filter
The HEPA filter is used to filter
viruses, respirable types of dust,
mite eggs and excretions, pollen,
smoke particles, asbestos,
bacteria, various toxic types of
dust and aerosols out of the air.
The HEPA filter is not washable.
1. Remove the grille from the
floor vacuum cleaner housing.
2. Change the K, L, M HEPA filter.
3. Put the grille into the vacuum
cleaner housing again.
PLEASE NOTE!
Danger due to faulty operation!
The HEPA filter must be changed every 6
months. The dirt filters and
motor filters must be renewed every
12 months. You can obtain a spare
filter set consisting of 6 floor vacuum
cleaner bags, 1 motor filter and 1
filter from www.ggv-service.de
HEPA