Publicité
Les langues disponibles
Les langues disponibles
Installation Guide
Touch Calibration
Perform touch calibration so that the projector can recognize touch operations precisely.
c
When two projectors are installed in parallel and you are using the interactive function, check the
following before performing touch calibration.
•
The multi-projection interactive features are set
"When two projectors are installed in parallel and you are using the interactive function"
s
•
Both projectors and the Touch Unit are turned on
a
Press the projector's [Menu] button
Using the Remote Control
b
Select Easy Interactive Function from Extended
c
Select Touch Unit Setup
Using the Control Panel
84
p.99
Publicité
