Publicité
Les langues disponibles
Les langues disponibles
Installing the Control Pad and the Pen Stand
Installing the Control Pad
See the following for the installation location of the Control Pad.
"When installing the Control Pad and the Pen Stand"
s
a
Remove the front cover
b
Check the installation position and secure with commercially available M4 screws (20 mm
x4)
Warning
•
Be careful not to tilt the screws to the installation surface when securing.
•
Make sure that the Control Pad is secured properly.
•
Do not use double-sided tape or magnets to secure the Control Pad.
c
We recommend checking the operation of the Control Pad before securing with screws.
p.27
61
Installation Guide
Publicité
