Publicité
Les langues disponibles
Les langues disponibles
When the Touch Unit is installed (side)
Touch Unit Bracket weights approximately 750 g.
Attached labels
The Touch Unit is a Class 1 laser product that conforms to the IEC/EN60825-1:2007 standard.
There are warning labels affixed to the Touch Unit to indicate that it is a Class 1 laser product.
The labels contain the following information.
• Class 1 laser product
• Warning: Do not open the case. The device contains a high power laser product.
• Warning:
• Caution: If this section is opened, class 3B invisible laser radiation will be emitted.
• Avoid exposure to the radiation beams.
Laser diffusion port
The laser beam is diffused from the laser diffusion ports at the back of the Touch Unit.
100.8
30
21
Installation Guide
[Unit: mm]
Publicité
