Operation; Settings & Adjustments - vollara Air & Surface Pro Manuel D'utilisation

OPERATION

CAUTION
1. Take your Vollara® Air & Surface Pro unit out of the
shipping carton and remove all protective materials.
2. Place your unit in an appropriate location which should
be four feet or higher from the ground. Never set it on
the floor. Place in a location away from the HVAC return
duct. The rear of the unit requires one inch or more of
open area to allow unrestricted airflow.
3. Insert the Power Supply Plug into the power receptacle
on the rear of the unit. Plug the appropriate cord into
the Power Supply and into a working electrical outlet.
4. Push the Power button once to turn the unit on.
5. Push the A-PURE/A-PURE x2 button twice to set it to
A-PURE x2 level which will be illuminated on the screen.
6. Push the Fan + button four times to reach the highest
speed (5th level).
SETTINGS & ADJUSTMENTS
The Vollara Air & Surface Pro can be turned on or off, and adjusted, using the control panel on the front of the unit.
NOTE: If you are operating your central heating and air conditioning fan or other ventilation system continuously, set
the coverage up to the total ventilated indoor area. Otherwise, set the coverage up to the size of the room.
POWER (STAND BY)
Turns the unit ON and OFF.
FAN UP/FAN DOWN
Adjusts the five speed fan.
A·PURE/A·PURE x2
Toggles the unit between A·PURE Mode
(ActivePure ® and Ionization) and A·PURE x2
Mode
(2 ActivePure
REMINDER RESET
Clears the maintenance reminders after
performing routine maintenance.
6
To prevent injury, be sure the power cord is not accessible to small children.
Cells and Ionization).
®
• A·PURE MODE: The unit's display shows the fan
speed (low to high) and A·PURE to indicate that the
ActivePure Cell and ionization are both functioning
®
normally.
• A·PURE x2 MODE: A·PURE x2 lights up, indicates
that (2) ActivePure
functioning normally.
• ION MODE: Ion lights up, indicates only ionization
is functioning.
• CLEAN: Clean illuminates when cleaning is
required.
• RESET: Clears the maintenance reminders after
performing routine maintenance.
• CELL: The Cell light will flicker when it is time to
replace your ActivePure
For best results, run your Vollara Air & Surface Pro
24 hours a day, 7 days a week, giving you the benefits
of ActivePure day and night.
Reminder Reset
Power ON/OFF
Cells and ionization are both
®
Cell.
®
Fan UP
x2
A·PURE /
Fan DOWN
A·PURE x2
x2