Publicité
Les langues disponibles
Les langues disponibles
1.press CD button to select "CD"
2.Load a recorded CD-RW.
3. press ERASE in stop mode.
(1) Wait until "bUSY" disappears on display.
(2) Press
player button to begin erase last track.
(3) Repeat pressing Erase button to continue next track."Er" and last track number
appear when the disc has been finalized. Each time the ERASE button is pressed,
display changes as follows: "Er" and number of the last track recorded on the disc
select this to erase the last track on disc. This will not appear then only one track is
recorded on the disc.
4.Erase ALL
Select this to erase all the tracks. To cancel erasing or unfinalizing process, press t
STOP button.
(1).Press and hold "Erase" button till "Erase All" displays.
(2) Press
play button to begin erasing.
(3) "0000000" displays to confirm the disc is clear.
The remaining time for the operation displays. When the operation has been finished,
the display returns to the track/time display. During erasing/unfinalizing , no buttons
work. Never turn the power off nor unplug power cord. This operation cannot be
undone. If you are going to erase a track or tracks, make sure that they are recording
that you really want to erase. The copy CD-RW disc from other unit can't be erased one
by one in this unit. but can be erase all.
Troubleshooting Guide
Problems with sound
- Rotate the power/volume knob Clockwise to increase volume.
-Make sure wall socket is switched on.
- When playing a cassette, make sure it is properly inserted.
- When playing a CD ,make sure it is inserted face up .
-When playing a CD via AUX IN connection, make sure cable is firmly connected, all
controls on CD player are properly set, disc tray is closed and disc is clean and
undamaged.
70
Publicité
