Publicité
Les langues disponibles
Les langues disponibles
2.Copy content of Cassette to CD-R/CD-RW
See phono encoding.
CD Operation
1.CD1 PLAY:
(1)Press "CD1 Button"．
(2) Press CD-Rom switch to open disk tray door.
(3)Place CD.Then press CD-Rom switch again to close disk tray door.
(4)To play a different track on record, Press skip up
or skip down
button
to select desired track.
(5)Press
button to stop．
(6)To adjust volume level, turn volume knob to right or left.
Remark: Other functions
can be controlled by small remote
controller when CD1 plays.
2.CD2 PLAY:
See CD1 play.
CD encoding
1. Copy the content of CD1 to CD2．
(1)Press "Open/Close Button "of CD1,put CD-R&CD-RW on Tray, then press
"Open/Close Button" and close Tray and automatically identify type of CD-R & CD-RW,
same for CD2.
(2)Press Button
of CD1 Function(transfer to CD1PlayerBack Mode)→CD1 player
will automatically play from TRACK1→Press
REV Button &
F.F Button to
choose content you need to copy.
(3) COPY directly：Press RECORD(CD2)Button →Press player
of CD2 Function to
confirm→Begin to COPY→COPY finished press
button．
(4) INCREMENT TRACK COPY: press MANUAL AUTO Button → Select recording size of
the signal level(-20,-30,-40dB) → press RECORD(CD2)Button → press CD2 Function
to confirm → begin to COPY→press INCREMENT TRACK Button →Press stop button
when finished.
2.COPY the content from CD1 to USB & SD ．
(1) Put CD-R&CD-RW on CD1 tray and close it.
64
Publicité
