Eurotops EP603 Mode D'emploi page 67

2. Press program PROG button, MEM flashes, and program number and digits for the
track number to be programmed will be shown.
3. Press SKIP UP or
4. Press program PROG button to store track into the memory.
5. Repeat steps 3 and 4 to enter additional tracks into the memory.
6. When all desired tracks are programmed, press the
tracks in assigned order.
7. To cancel programming, press STOP button twice.
Copying of MP3 / WMA files
Copying a single file/track
1. Insert USB storage device and SD/MMC card, then select USB/SD mode .
2. Press record
Press the record
3. USB or SD icon flashes while the system is copying the file.
4. Once file has been copied, the unit stops playback automatically. "END" displays and
the system will revert to USB or SD mode.
Copying a folder
1. Insert a USB storage device and SD card, then select USB/SD mode. When the system
has recognized the device, press
2. Turn tuning knob to select desired folder for copying.
3. Press record
button.
4. USB or SD icon flashes while the system is copying the folder.
5. When the folder has been copied, USB or SD icon stops flashing.
Copying all files/tracks
1. Insert USB storage device or SD card, then select USB/SD mode . When the system
has recognized the device, press
2. Press record
button to select ALL" displays. Press record
3. USB or SD icon flashes while the system is copying files/tracks.
4. When all files/tracks have been copied, USB or SD icon stops flashing.
NOTE: If you press record
will copy from USB to SD or vice versa.
SKIP DOWN button to select a desired track.
REC button during playback of track you want to copy: "ONE" flashes.
REC button again to confirm.
REC button: "ONE" flashes. Press
REC button: "ONE" flashes. Press
REC button during playback in USB or SD mode, the file
stop button.
stop button.
REC button again to confirm.
PLAY/PAUSE button to play
SKIP UP or SKIP DOWN
SKIP UP or SKIP DOWN
67