Publicité
Les langues disponibles
Les langues disponibles
(2)Press
button on CD1 Function(transfer to CD1 Player Back Mode)→it will play
from TRACK 1 CD1 →Press
need COPY.
(3) Insert into USB∕SD Socket respectively．
(4) Press REC(USB∕SD)Button → press CD1 Function
press REC(USB∕SD)Button → press CD1 Function
press REC(USB∕SD)Button to confirm→begin to COPY→ the icon of USB/SD flashes
(when copy)→COPY finished press
Attention: Please Press STOP or the copy will couldn't be saved on USB/SD.
Aux In
1. Aux In external input signal after amplification
(1) Press "Power & Volume Knob".
(2) Press "AUX Function Button", transfer to AUX status.
(3) CD, MP3, Music or other player signal through 3.5mm plug cord → insert into Aux In
Socket of panel left→ open the external player →continue the external player signal.
2. Copy the signal of Aux In to USB∕SD：
(1) Press "Power & Volume Knob" and play Aux in signal
(2) Insert USB or SD.
(3) Press REC (USB/SD) Button → Press CD1 function
(USB&SD) → then press again REC (USB/SD) Button to confirm → to continue COPY →
the icon of USB/SD will flash on display screen (when you copy)→COPY finished press
button.
3.Copy the signal of Aux In to CD2：
(1) Press power/volume knob to turn on device.
(2) Press AUX Function Button, switch to AUX function.
(3) Insert outside audio source signal (such as CD player, mp3,other audio device)
into" Aux in "socket of main body, via 3.5mmm-jack cable .---> start play the
outsource device(CD,MP3 etc).
(4) Turn the volume knob to desired level.
(5) Direct copy . Press CD2 OPEN/CLOSE Button, then put CD-R &CD-RW on Tray,
and press Open/Close Button, close Tray.
(6) Press RECORD (CD2) Button → Press Function CD2
begin to COPY →Press
(7) Copy for INCREMENT TRACK
REV Button &
button.
button to end．
F.F Button to select content you
&
COPY( ONE &ALL )→ and
&
to save(USB/SD) →at last
&
to select Save Path
PLAYER to confirm →
65
Publicité
