Publicité
Les langues disponibles
Les langues disponibles
2
Loading originals to fax
Sending faxes
Note
ENXC
Faxing (basic)
This chapter will present some of the basic faxing features available on
your HP LaserJet 3330. For complete information on all fax features, as
well as information about all other product features, refer to the
electronic user guide that came on your product CD-ROM. For
instructions on accessing the electronic user guide see
electronic user guide" on page
Use the following instructions to load original documents for faxing.
To load fax documents
1
Before loading the fax documents into the ADF input tray, make sure
there is nothing on the scanner glass.
2
Put the top ends of the document to be faxed print side up in the
ADF input tray with the first page to be scanned at the top of the
stack.
3
Push the document up against the side of the ADF input tray.
4
Slide the document into the ADF input tray until it does not move
any farther.
The document is now ready to be faxed.
To send a fax to one recipient
If you want to improve the quality of a paper document before faxing it,
scan the document, straighten or clean the image, and send it as a fax
from the software. For more information, see the electronic user guide.
1
Dial the fax number using one of the following methods:
•
Use the alphanumeric keypad on the product's control panel.
•
If the fax number you are calling has been assigned to a
one-touch key, press that key.
38.
Loading originals to fax 15
"Accessing the
Publicité
