Publicité
Les langues disponibles
Les langues disponibles
Setting the answer mode
ENXC
3
Press menu/enter to select Time/Date.
4
Using the < and > buttons, specify either the 12-hour or the 24-hour
clock, and press menu/enter.
5
Using the alphanumeric keypad, enter the current time.
6
If you specified the 12-hour clock, use the < and > buttons to move
the cursor past the fourth character. Select 1 for a.m. or 2 for p.m.,
and press menu/enter.
OR
If you specified the 24-hour clock, press menu/enter.
7
Using the alphanumeric keypad, enter the current date.
•
Make sure you use two digits to specify the month and day (for
example, use "05" for May and "01" for the first day of the month).
8
Press menu/enter.
To set the fax header
To set or change the fax header information, use the following steps. If
you need help entering any information, see
control panel" on page
1
On the control panel, press menu/enter.
2
Using the < and > buttons, select Time/Date, Header, and press
menu/enter.
3
Using the < and > buttons, select Fax Header, and press
menu/enter.
4
Using the alphanumeric keypad, enter your fax number, and press
menu/enter.
5
Using the alphanumeric keypad, add the name of your company,
and press menu/enter.
Depending on your situation, you can set the HP LaserJet 3330's
answer mode to automatic or manual.
Automatic: In automatic answer mode, the product answers
incoming calls after a specified number of rings or upon recognition
of special fax tones. To specify the number of rings, see
rings-to-answer" on page
Manual: In manual answer mode, the product never answers calls.
You must start the fax-receiving process yourself, either by pressing
start fax on the control panel or by picking up a phone connected to
that line and dialing 1-2-3.
The default answer mode is automatic.
"To enter text from the
10.
12.
Setting the answer mode 11
"Setting
Publicité
