Publicité
Les langues disponibles
Les langues disponibles
12. Parameter setting:
Under the OFF state, press
switch the modes: F1 window open detection→F2 temperature compensation→ Exit (Off).
F1-Window
open detection
F1-Window
open detection
F2-Temperature
compensation
for 10s to enter the parameter setting, then short press
Figure
Description
Operate
and
window opening function, display oF is
closed, oN is open (default is closed).
When user turning on this function in the
heating state, and the indoor temperature
suddenly drops by 5°C within 5 mins. it
means that the windows of this room have
been opened.
The product will stop heating, it will starts
heating again after 65 mins. if the indoor
temperature still keeps dropping, the
product will stop heating again, in cycle.
You can adjust the sensitivity of the
radiator by pressing
will allow you to define the temperature
difference that causes the heating to stop.
For example:
Sensitivity -2°C / comfort temperature 19°C
heating will stop when the temperature sensor records
21°C .
Sensitivity +5°C / comfort temperature 19°C
heating will stop when the temperature sensor records
14°C .
By default, the deviation is +/-2°C but you
can vary it up to +/-5°C by advancing 1°C
at a time.
to
to switch on & off the
and
. This
The
→
The
→
Publicité
