Publicité
Les langues disponibles
Les langues disponibles
- Do not place the unit near a barrier limiting the airflow around it.
- Attach the heater vertically to the wall as described below.
- Choose screws and plugs suitable for the wall material and weight of the unit.
RECOMMENDATIONS FOR WALL MOUNTING
Do not make any changes to the unit or its mounting bracket on the wall!
Before installing the device, check the condition of the wall on which it will be fixed: the wall must
be in good condition, it must not show any damage (cracks, sagging, humidity, ...).
Do not drill holes near old holes, even when they are closed.
It is imperative that you consult a building professional to use the anchoring system (screws,
dowels, etc.) appropriate for the material that constitutes your wall, as well as the weight of the
appliance. Observe the diameter of the fixing screws indicated in this manual.
Do not modify the holes for securing the unit or its mounting bracket to the wall.
Drill the wall with a drill of the appropriate size for the anchoring system. Remove debris and dust.
Regularly check the mounting points of the device on the wall. Tighten them if necessary.
INSTALLATION IN THE BATHROOM
Warning: this product shall be used in volume 2 and out of volume only according to the national
wiring rules (For France NF C 15-100)
Note: The drawing is for reference only .
We suggest that you contact a professional electrician for assistance.
ELECTRICAL CONNECTION
Publicité
