Publicité
Les langues disponibles
Les langues disponibles
CAUTION: Before working, turn off the electricity at the main circuit breaker.
- The installation must be carried out in the rules of the art and meet the standards in force in the
country (NF C 15-100 in France).
- The unit must be connected to a standard wall box placed at least 60 cm from the floor.
- The appliance must not be connected to an outlet with a power plug.
- The appliance must be supplied through a residual current device (RCD) having a rated residual
operating current not exceeding 30 mA.
- The appliance must not be connected to the earth wire (yellow and green wire).
ELECTRICAL CONNECTION
Blue or light gray wire connect to Neutral (220-240V)
Brown or red wire connect to Phase (220-240V)
Black wire connect to pilot wire. (Optional function to use in case of control by pilot wire box)
- In the absence of pilot wire, insulate the bare end of the black wire to prevent electrical contact
with the other wires or ground.
WALL-MOUNTED Installation
Publicité
