Axis PROD UNIT OB USB W Mode D'emploi page 9

Set a Temporary IP Address with Arp/Ping:
You can assign a temporary IP address to the print server using
arp/ping and then access the print server's internal web pages to
assign a fixed IP address:
1. Locate the print server's serial number (S/N) found on the print
server's underside label. The Ethernet address is based on the
serial number:
Serial number:
00408c181cf0
2. Open a Command Prompt or Terminal and enter the following
syntax:
Syntax
1
arp -s <IP address> <Ethernet address>
2
ping <IP address>
Syntax
1
arp -s <IP address> <Ethernet address>
2
ping <IP address>
3. The host will return psname is alive (Mac OS Terminal) or Reply
from 192.168.3.191... (Windows Command prompt) or a
similar message. This indicates that a temporary IP address has
been set and that communication is established.
4. Next, open a web browser (e.g. Internet Explorer).
5. In the Web browser's Location/Address field, enter the print
server's IP address and press Enter.
MAC/Ethernet address:
00-40-8c-18-1c-f0 (Windows)
00:40:8c:18:1c:f0 (Mac OS)
Example Windows (Command prompt)
arp -s 192.168.3.191 00-40-8c-18-1c-f0
ping 192.168.3.191
Example Mac OS (Terminal)
arp -s 192.168.3.191 00:40:8c:18:1c:f0
ping 192.168.3.191
8