Axis PROD UNIT OB USB W Mode D'emploi page 10

6. The print server's web page will appear. Go to Setup | TCP/IP:
7. Assign a fixed IP address to the print server: select Use the
following TCP/IP settings radio-button and enter a valid IP
address, Subnet Mask and Default Router.
8. Click Save and Restart. The new, static IP address will be
loaded.
9. Check the communication by entering the new IP address in the
browser and that the print server's web pages appear again.
• When you execute the ping command for the first time, you may
experience a significantly longer response time than usual.
• The IP address and serial number used here are sample values. You
must acquire a new and unused IP address from your network admin-
istrator.
Continue with Windows Setup, on page 13 or Mac OS Setup, on
page 27.
9