Axis PROD UNIT OB USB W Mode D'emploi page 8

IP Addressing
To enable network communication with the print server, it must
have a proper IP address. Use one of these methods to assign an IP
address to the print server:
Server
Method:
Required:
DHCP DHCP server
Arp/Ping
Obtaining an IP address using DHCP
If you are working in a network with dynamic IP address
assignment, your print server will obtain an IP address automatically
when you connect it to the network. Follow the instructions on this
page to verify the IP address:
1. Print a test page by pressing the reset button for 5 seconds.
Locate the print server's IP address on the test page.
2. Open a web browser (e.g. Internet Explorer).
3. In the Web browser's Location/Address field, enter the print
server's IP address and press Enter.
4. If the Wireless Print Server web page appears in your Web
browser, the IP address is fully functional. Continue with
Windows Setup, on page 13 or Printer Installation - Mac OS, on
page 18.
5. If the Wireless Print Server web page does not appear, you
need to set the print server's IP address manually, described in
Set a Temporary IP Address with Arp/Ping:, on page 8.
Operating System
Windows
Mac OS
Mac OS
Windows
7
Comment:
The print server obtains an
IP address automatically
from a DHCP server. By
default, the print server's
DHCP function is enabled.
Manual assignment of an IP
address.