Axis PROD UNIT OB USB W Mode D'emploi page 13

Select Yes if you want change wireless settings or assign a static IP address to
the print server:
On the Basic Wireless Settings screen, select Communications Type
•
according to your network:
- Infrastructure
- 802.11b Ad-hoc
Enter the proper SSID of your wireless network. The default value <ANY>
•
will connect with the AP that has the best signal in your wireless network.
- Channel: optional.
- Data Transmit Rates: select Auto, 1,2Mbps, 5.5Mbps or 11Mbps.
On the Security and WEP Encryption Settings page, enable or disable
•
WEP Encryption, configure according to your wireless network and click
Next.
If your network uses 802.1X (EAP) authentication, select None or MD5 as
•
your authentication type. If you choose MD5 you must enter the same
Login Name and Password as defined on the Radius server.
• Specify a fixed or dynamic IP address for the print server, a fixed IP address
is highly recommended. Click Next.
Click Next in the program until you reach Figure: Select an already configured
printer or click Add New Printer, on page 13. Follow the instructions from there
on.
Notes:
• If you use WEP encryption on your WLAN and accidentally change the WEP
format or keys in the print server, you will lose contact with the print
server. Follow the steps described in the User's Manual to recover the con-
nection. The User's Manual is located on the CD and on www.axis.com.
• The IP address of the wireless print server must be within the same subnet
as your wireless adapter.
• A quick way of finding the print server's IP address is to press the reset but-
ton for 5 seconds to print a test page. The print server's DHCP address or
static IP address is normally displayed on the test page.
12