Niko 10-364 Information De Produit page 57

5. MOUNTING AND CONNECTION OF THE MODULE
5.1. Connection of the module
General information
• Connect the wires with the included flat-blade screwdriver, in order not to damage the device.
• The wires for the connection terminal may have a diameter between 0.3 and 1.4 mm.
• The internal resistance of the door opener shall not exceed 6 Ω.
5.2. Wiring diagram module in the stand alone mode with 10-801
5.3. Wiring diagram module in the stand alone mode with 10-806
EN
Light
Image 1: Wiring diagram module in the stand alone mode with 10-801
> 6 Ω
Light
Image 2: Wiring diagram module in the stand alone mode with 10-806
10-364
Door opener
> 6 Ω
10-801
10-364
Door opener
10-806
10-364
57