Operating Panel; Oven Functions - Beem Cucinetta Fire & Sun Mode D'emploi

BEEM - Elements of Lifestyle
15 Baking tray
16 Rotary spit grip
17 Grill grate grip and baking tray
18 Rotary spit
19 Rotary spit retaining clips
20 Shish kebab skewers (8 pcs.)
21 Shish kebab skewer holders
22 Frying basket
23 Pizza stone
24 Grease drip tray
25 User manual (not illustrated)

Operating panel

The display (3) shows which cooking time,
temperature and function is set. The selected
function is indicated by a red triangle. The
corresponding cooking time and temperature
digits flash during setting.
NOTE
► Each push of a button is acknowledged
by a signal tone.
First press the button to activate the MODE
set the individual functions.
Function Upper heat
Toasting
Rotary spit
Convector
(Defrost)
Roasting
NOTE
► It is only possible to change a function when no function is in operation.

Oven functions

Lower
heat
 

–
 
(approx.
–
50 °C)

–
Switching on and off
To switch on the appliance press the
The functions light up on the display. Press
the MODE button
sired function. Press the
start the selected function.
NOTE
► Before starting the function, set the
temperature and cooking time as described
in the sections Setting the temperature
(page 18) and Setting the cooking
time (page 18).
Pause button/Cancel
1. Press the Pause/Cancel button
once to stop the running function. You can
check the cooking process or change set-
tings.
2. Press the Start button
cooking.
3. Press the Pause/Cancel button
twice to stop all functions and reset the set-
tings. The appliance switches itself off auto-
matically after approx. one minute.
button. Press the MODE button
Air circu-
Rotation
lating fan
– –

–

–

–
– –
EN 17
(10).
(5) to select the de-
button again to
(9)
(10) to continue
(9)
(5) to
Basic setting
The last-used setting
is flashing
Temperature flashes
at 200 C°.
Temperature flashes
at 215 C°.
Timer display flashes
at 1 min 00 sec.
Temperature flashes
at 175 C°.