Switching On And Off; Appliance Description; Oven Functions; Operating Panel - Beem Cucinetta Mode D'emploi

Cucinetta

Appliance description

(see illustration on the left fold-out)
1 Housing
2 Door handle
3 Display
4 Function display
5 MODE function button
6 Temperature setting button
7 Timer setting button
8 Buttons
9 Pause/Cancel button
10 Start button
11 Feet
12 Oven door
13 Spacer rear side
(not illustrated)
14 Grill grate
15 Drip pan/baking tray
16 Rotary spit grip
17 Grill grate grip and drip pan/baking
tray
18 Rotary spit
19 Rotary spit retaining clips
20 Shish kebab skewers (8 pcs.)
21 Shish kebab skewer holders
22 Vegetable basket
23 Pizza stone
24 User manual
(not illustrated)

Operating panel

The display (3) shows which cooking time,
temperature and function is set. The se-
lected function is indicated by a red trian-
gle. The corresponding cooking time and
temperature digits flash during setting.
NOTE
► Each push of a button is acknowl-
edged by a signal tone.
26
To switch on the appliance press the
button (10). The functions light up on the
display. Press the MODE button
select the desired function. Press the
button again to start the selected function.
NOTE
► Before starting the function, set the
°C
temperature and cooking time as de-
scribed in the sections Setting the
temperature (page 27) and Setting
the cooking time (page 27).
Pressing the
ed function. You can check the cooking proc-
ess or change settings. Pressing the
button twice exits all functions and resets the
settings. The appliance switches itself off au-
tomatically after approx. one minute.
First press the
MODE
(5) to set the operating mode of the ap-
pliance. Pressing more than once runs
through all functions.
The available functions are:
–
Toasting
–
Rotary spit
–
Convector
– Defrosting
–
Roasting
See table Oven functions (page 27).
NOTE
► It is only possible to change a func-
tion when no function is in operation.
BEEM - Elements of Lifestyle

Switching on and off

button (9) stops the activat-

Oven functions

button to activate the
. Press the MODE button
EN
(5) to
(9)