Description Of The Appliance; Assembly - Kärcher K 4 Basic Mode D'emploi

Description of the Appliance

Illustrations on fold-out page!
1 Garden hose connector (fe-
male)
2 Coupling element for water connection
3 Quick coupling for high pressure hose
4 Water connection with integrated sieve
5 Appliance switch „0/OFF" / „I/ON"
6 Transport handle, detachable
7 Mains cable with mains plug
8 Detergent suction hose with filter
9 Transport wheel with wheel cap
10 Trigger gun
11 Lock trigger gun
12 Key to detach the high pressure hose
from the trigger gun
13 High pressure hose
14 Spray lance with Dirtblaster
For strong contaminations.
15 Spray lance with pressure regulation
(Vario Power)
Carrying out the most common cleaning
tasks.
The working pressure can be continu-
ously increased from "SOFT" to
"HARD". To adjust the working pres-
sure, release the trigger gun lever and
turn the spray lance to the desired posi-
tion.
Suitable for use with detergents.
** Additionally required
16 Fabric-reinforced water hose with com-
mercially available coupling.
- Minimum diameter, 1/2 inches
(13 mm).
- Minimum length 7.5 m.
Special accessories
Special accessories expand the possibili-
ties of using your appliance. Please contact
your KÄRCHER dealer for further informa-
tion.

Assembly

Illustrations on fold-out page!
Mount loose parts delivered with
appliance prior to start-up.
Install wheels
Illustration
 Push the wheels into the intake and se-
cure them with the plugs. Align the plug
properly.
Install the transport handle
Illustration
 Place the transport handle into the in-
take until you feel resistance. Use the
heel of your hand or a soft rubber mallet
to position it.
English 19