Description Of The Appliance; Assembly - Kärcher K 4 Premium Manuel

Description of the Appliance

Illustrations on Page 2
1 Water filter
2 Coupling element for water connection
3 Storage for trigger gun
4 Water connection with integrated sieve
5 Appliance switch "0/OFF"/ „I/ON"
6 High pressure hose
7 Dosage regulator for detergent
8 Storage for trigger gun
9 High-pressure hose drum
10 Transport handle
11 Hand crank for hose drum
12 Storage of Plug 'n' Clean detergent bot-
tle with detergent connection
13 Storage for spray lance
14 Storage hook for mains connection ca-
ble
15 Mains cable with mains plug
16 Plug 'n' Clean detergent bottle with
locking lid
17 Bearing wheel
18 Trigger gun
19 Lock trigger gun
20 Key to detach the high pressure hose
from the trigger gun
21 Spray lance with pressure regulation
(Vario Power)
Carrying out the most common cleaning
tasks. The work pressure can be stage-
lessly regulated between "Min" and
"Max". You can add detergent when
"Mix" is selected.
In order to adjust the working pressure,
release the lever of the trigger gun and
turn the spray lance to the desired posi-
tion.
22 Spray lance with Dirtblaster
For strong contaminations
** not included in the scope of delivery
23 Water supply hose
Special accessories
Special accessories expand the possibili-
ties of using your appliance. Please contact
your KÄRCHER dealer for further informa-
tion.

Assembly

Mount loose parts delivered with appliance
prior to start-up.
Illustrations on fold-out page!
Install wheels
Illustration
 Push the wheels into the intake.
 Secure the wheels using the included
plug. Align the plug properly!
Install the storage for trigger gun
Illustration
 Place the bottom holder into the recess-
es and push forward until it audibly
locks in.
 Insert the top holder and push down all
the way.
Install the storage hook for the
mains connection cable
Illustration
 Press in the storage hook and lock it
into the top position.
Install the transport handle
You will need the 2 included screws as well
as a Phillips screwdriver PH 2.
Illustration
 Slide the transport handle into the guide
and secure it with 2 screws.
Install the dosage regulator for
detergent
You will need the 2 included screws as well
as a Phillips screwdriver PH 2.
Illustration
 Insert both detergent hoses onto the
hose fittings.
 Install the dosage regulator and con-
nect using 2 screws.
Note: During installation you must
make sure that the tongues of the dos-
age regulator match up with the intend-
ed recesses in the casing.
English 19