Publicité
Les langues disponibles
Les langues disponibles
05-201
5. HoW IS THE PC-LoGIC SET uP?
Start-up & test
Switching on the device for the first time will start a test auto-
matically!
The LCD will display briefly the name of the device and the corresponding software
version.
This test takes a few seconds; the device then starts its standard operation and displays the
main screen. The actual state of the logical inputs is indicated.
Setting the 6 logical inputs
The settings will be displayed the way they have been programmed the last time. The
real state of the input will be displayed automatically.
1. Briefly press
2. Briefly press
3. Briefly press
to high
2
.
4. Briefly press
5. Repeat 3 & 4 until the logical values are set.
6. Briefly press
screen.
GB
and select the menu point.
and select the state of the input.
in order to change the logical value from low 2
in order to select the next input.
to store the settings and return to the main
Niko nv-sa
PC-Logic
v 3.0
M
1 2 3 4 5 6
_ _ _ _ _ _
[ SET INPUTS
]
Send ID
SET INPUTS
1 2 3 4 5 6
>
SET INPUTS
1
2
3 4 5 6
>
SET INPUTS
1
2
3
4
5 6
[ >]
M
1 2 3 4 5 6
_ _ _ _ _ _
51
Publicité
