Technical Data; Key To The Symbols - cefar primo Mode D'emploi

Masquer les pouces Voir aussi pour primo:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 34

TECHNICAL DATA

CEFAR PRIMO is a nerve stimulator
(TENS) with two independent channels
and 9 pre-set treatment programs. The
stimulator has buttons for setting of
program and amplitude for each channel.
An automatic key lock is activated 20 sec.
after the amplitude has been set.
CEFAR PRIMO EASY is a nerve
stimulator (TENS) with two non-
independent channels and 3 pre-set
treatment programs. The stimulator has
buttons for setting of program, amplitude
and timer. An automatic key lock is
No. of channels
Constant current ohm
Stimulation current/channel 0-60 mA
Wave form
No. of pre-set programs
24
Stimulation forms
Pulse duration
Frequency
Timer
Environment for
storage, use and shipping
Power source
Current consumption for
one channel, 80 Hz, 30 mA
I r.m.s. max/channel
Size
Weight

Key to the symbols

CEFAR PRIMO
2 (independent)
Up to a resistance of 1500 ohm
Asymmetrical biphasic pulse, 100% compensated
9
Conventional
Burst
Modulated pulse duration
Mixed frequency
See program p. 19.
See program p. 19.
See program p. 19.
Temperature 10º C–40º C • Air humidity 30%–75% • Air pressure
700hPa–1060 hPa
2 pcs 1.5 V AA non-rechargeable or 2 pcs 1.2 V AA rechargeable
batteries
100 mA
10 mA
120 x 53 x 33 mm
c. 185 g
Read the operating instructions prior to use.
Complies with MDD 93/42/EEC requirements. Notified body SEMKO AB.
A reference library is available on Cefar's home page, www.cefar.se.
activated 20 sec. after the amplitude has
been set.
The stimulators run on either two non-
rechargeable 1.5 V AA batteries or two
rechargeable batteries, recharged in a
separate charger. Treatment with electrical
stimulation requires the stimulation
current to penetrate the resistance of the
skin and the electrode, about 1500 ohms.
CEFAR PRIMO and CEFAR PRIMO
EASY can penetrate this resistance and
maintain a current of up to 60 mA. With
a change in load from 100 to 1500 ohms,
the stimulation current changes less than
5% from the set value.
CEFAR PRIMO EASY
2 (non-independent)
Up to a resistance of 1500
0-60 mA
3
Conventional
Burst
Modulated pulse duration
- - -
See program p. 21.
See program p. 21.
30 minutes/OFF
100 mA
10 mA
120 x 53 x 33 mm
c. 185 g
Patient part type BF – Body Floating.

Publicité

Table des Matières
loading

Produits Connexes pour cefar primo

Ce manuel est également adapté pour:

Primo easy

Table des Matières