Practical Use Cefar Primo Easy - cefar primo Mode D'emploi

PRACTICAL USE CEFAR PRIMO EASY

Turns the stimulator on and off.
The stimulator can be switched off even when
the key lock is activated.
Selection between programs 1–3 for both
channels.
Changing of programs can only be done
when both channels are set to 0.0 mA.
Amplitude increase for each channel.
The button can be held in for a
continuous increase of amplitude.
NOTE! Increase the current strength
cautiously.
Amplitude decrease for each
channel.
The button can be held in for a
continuous reduction of
amplitude.
20
Deactivation of key lock.
The timer works for both channels.
If the timer is activated the stimulator works for
30 minutes and is then automatically switched off. A clock
symbol is shown when the timer is activated.
A key symbol is shown when the key lock is activated.