Kinetico Mach Serie Guide D'utilisation page 14

Kinetico Mach Series Backwashing Filters
System Specifications
Mach Series 2060f with Overdrive
Service Flow Rate (GPM) @ 15 psid:
Peak Flow Rate (GPM) @ 30 psid:
Optimal Media Flow (GPM):
Media per Tank (cu. ft.):
Max. Flow Rate to Drain During Backwashing (GPM):
Mach Series 2100f with Overdrive
Service Flow Rate (GPM) @ 15 psid:
Peak Flow Rate (GPM) @ 30 psid:
Optimal Media Flow (GPM):
Media per Tank (cu. ft.):
Max. Flow Rate to Drain During Backwashing (GPM): 6 (23 Lpm)
Mach Series 4060f with Overdrive
Service Flow Rate (GPM) @ 15 psid:
Peak Flow Rate (GPM) @ 30 psid:
Optimal Media Flow (GPM):
Media per Tank (upper)(cu. ft.):
Media per Tank (lower)(cu. ft.):
Max. Flow Rate to Drain During Backwashing (GPM):
For all models (except 2080f Greensand)
Min./Max. Operating Pressure: 20-125 psi (137.8-861.8 kPa)
Min./Max. Operating Temperature: 35° - 120° F (1.6° - 48° C)
System Specifications
Mach Series 2080f with Overdrive Greensand
Service Flow Rate (GPM) at 15 psid -
Service Flow Rate (GPM) at 30 psid -
Optimal Media Flow (GPM) :
Media per tank (cu. ft.) :
Max Flow Rate to Drain During Regeneration :
Min/Max Operating Pressure: 30-125 psid (206.8-861.8 kPa)
(Recommend low 40 psid) (275.8 kPa)
Min/Max Operating Temperature:
13
Media
Macrolite Carbon/Calcite
8 (30 Lpm) 8 (30 Lpm)
12 (45 Lpm) 15 (57 Lpm)
7 (26 Lpm) 4 (15 Lpm)
0.4 (11.32 L) 0.7 (19.82 L)
4 (15 Lpm) 4 (15 Lpm)
Macrolite Carbon/Calcite
10 (38 Lpm) 10 (38 Lpm)
18 (68 Lpm) 18 (68 Lpm)
10 (38 Lpm) 5 (19 Lpm)
0.7 (19.82 L) 1.5 (42.47 L)
6 (23 Lpm)
Macrolite/Carbon
11 (42 Lpm)
18 (68 Lpm)
11 (42 Lpm)
0.2 (5.66 L)
0.7 (19.82 L)
3 (11 Lpm)
Media
8 (30 Lpm)
10 (38 Lpm)
8 (30 Lpm)
0.82 (23.22 L)
6 gpm (23 Lpm)
35° - 120°F (1.6° - 48° C)