i-tec C31AHDMIPD Mode D'emploi page 10

i-tec USB-C Travel Adapter PD/Data
CHARGING
The adapter supports charging of the connected USB mobile devices such as
smart phones, e-book readers, multimedia players, navigation devices, and
tablets. Simply connect the device that you want to charge using the original
cable to the USB port of the adapter. If the device is not charged or does not
work, connect the original USB-C power adapter to the USB-C port of the
adapter for support of charging.
AUDIO
Audio output devices, for listening through HDMI, need to be set /
ź
verified here: System Preferences-Sound-Output – select HDMI
Audio Device.
Setting the audio output device to both the earphones and the monitor
ź
simultaneously can be done in Open-Applications-Utilities-Audio
settings MIDI.app – click on „+" on the left at the bottom – Create
device with multiple outputs and select the desired outputs from the
offered options on the Device with multiple outputs.
Note: The majority of problems with the adapter and the connected
peripheral devices can be solved by disconnecting the USB-C cable of
the adapter from the USB-C port of the PC / Mac / smartphone and
reconnecting after approximately 10 s.
SAFETY INSTRUCTIONS
Do not expose to extreme temperatures and air humidity.
ź
Use the device on flat surfaces – you will prevent it from slipping and
ź
falling to the ground.
Save the user manual for a possible use later.
ź
In cooperation with the service department:
Check functionality after falling to water or to the ground.
ź
Check functionality when the cover is broken.
ź
Send the device back if it does not work in accordance with the user
ź
manual.
FREQUENTLY ASKED QUESTIONS
Question: Can I get more detailed information on the problems related to the
USB-C adapter?
Answer: Of course, you can contact our technical help:
support@itecproduct.com
EN
09