Bose Virtually Invisible 191 Guide D'installation page 33

Accessories
• Drop Ceiling Kit for two speakers – PC031355
Protects the tile from bearing the weight of the speakers. Instructions included.
• Rough-in Kit for two speakers – PC031353
Reserves a place for the speakers after the studs are in place and before the wallboard is added, and indicates where
the wallboard hole should be made. Instructions included.
For further information or to order accessories, contact your Bose
included in the carton.
Technical information
Features
• Virtually Invisible ® and Articulated Array
• Proprietary enclosure technology
• Stereo Everywhere ® speaker performance
• Paintable grille
• Syncom ® computer tested
Compatibility
• Compatible with amplifiers or receivers rated 10-100W per channel/rated 4 to 8 ohms
• 50W IEC continuous power handling; rated 6 ohms
Driver complement
• Two (2) 2 1 / " (6.4 cm) full-range drivers per speaker
2
Enclosure
• Ported and molded high-impact polystyrene
• White frame and grille
Dimensions
• Each speaker:
13 3 / "H x 7 7 / "W x 3 7 / "D (34.9 cm H x 19.9 cm W x 9.8 cm D)
4 8 8
• Wall or ceiling surface area required for each:
Rectangular-faced speaker – 8
Round-faced speaker – 10
Weight
• 4.5 lb (2.0 kg) each
® speaker design
3 / "W x 6"H (20.5 cm x 14 cm)
4
1 / " diameter (26 cm)
4
® dealer. Or, to call Bose directly, refer to the address list
Reference
33