Bosch GBL 620 Professional Notice Originale page 6

6 | English
Keep cutting tools sharp and clean. Properly main-
u
tained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
Use the power tool, accessories and tool bits etc. in
u
accordance with these instructions, taking into ac-
count the working conditions and the work to be per-
formed. Use of the power tool for operations different
from those intended could result in a hazardous situation.
Keep handles and grasping surfaces dry, clean and
u
free from oil and grease. Slippery handles and grasping
surfaces do not allow for safe handling and control of the
tool in unexpected situations.
Service
Have your power tool serviced by a qualified repair
u
person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
Safety instructions for blower
Do not blow any harmful substances, e.g. beech or oak
u
wood dust, rock dust or asbestos. These substances are
classified as carcinogenic.
Do not blow any liquids. The penetration of liquids in-
u
creases the risk of an electric shock.
Pay attention that bystanders are not injured by for-
u
eign objects that are blown off by the product.
Keep your fingers away from the openings of the
u
power tool during operation. Only operate the blower
with a nozzle attached. The rotating fan can injure you.
Ensure that the workplace is well ventilated.
u
Do not let children use the power tool unsupervised.
u
Children are at risk of injuring themselves this way.
Wear additional personal protective equipment such
u
as protective glasses and a protective mask. Wearing
personal protection equipment appropriate to the condi-
tions reduces your exposure to hazardous substances.
Products sold in GB only:
Your product is fitted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Do not expose power tools to rain or wet conditions.
u
Water entering a power tool will increase the risk of elec-
tric shock.
If operating a power tool in a damp location is un-
u
avoidable, use a residual current device (RCD) protec-
1 609 92A 5N1 | (10.03.2020)
ted supply. Use of an RCD reduces the risk of electric
shock.
Never use the power tool if the cable is damaged. Do
u
not touch the damaged cable and pull out the mains
plug if the cable is damaged while working. Damaged
cables increase the risk of an electric shock.
Do not crush the cable or run the device over it. Do not
u
pull on the power cable to pull the plug out of the
socket or to move the power tool. Damaged cables in-
crease the risk of an electric shock.
Pull the plug out of the socket before adjusting the
u
tool settings, changing accessories, or storing the
power tool. Such preventive safety measures reduce the
risk of starting the power tool accidentally.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is suitable for blowing unharmful substances.
The power tool is not suitable for blowing flammable materi-
als, metal chips and sharp objects such as screws or nails.
Product features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Handle
(2) Lock-on button for on/off switch
(3) On/off switch
(4) Caps for carbon brushes
(5) Air outlet
(6) Nozzle
(7) Air inlet
(8) Carbon brushes
Technical Data
Blower
Article number
Rated power input
Air volume
Air pressure
Weight according to
EPTA-Procedure 01:2014
GBL 620
3 601 J80 5..
W 620
3
m /min 3.5
mbar 60
kg 1.6
Bosch Power Tools