Leggett & Platt Premier premium MODELS Mode D'emploi page 17

d. Place headboard flange weldment against headboard bracket
weldment. Install (2) 1" long hex bolts through slots in headboard
bracket weldment and holes in headboard flange weldment
(FIGURE 15). Secure using (2) hex nuts. Loosely tighten to allow
adjustment for headboard hole alignment.
FIGURE 15
HEADBOARD
FLANGE
WELDMENT
e. Repeat procedure to attach the other headboard bracket assembly
(FIGURE 16).
FIGURE 16
USE (2) 1 INCH LONG HEX HEAD
BOLTS TO ATTACH FLANGE
WELDMENT TO BRACKET WELDMENT
INSTALLATION
HEADBOARD
BRACKET
WELDMENT
SLOTS
1 INCH LONG
HEX HEAD BOLT
Premier Series Owners Manual 99301588-b
™
17