Leggett & Platt Premier premium MODELS Mode D'emploi page 12

STEP 6
Plug base into a working, grounded electrical power source (FIGURE 10),
making sure to avoid making contact with the surround at that time, as this will
trip LP Sense . Note: An electrical surge protection device is recommended
®
(not included).
FIGURE 10
STEP 7
Briefl y activate all functions of the base with the remote control to verify
all features are in working order. If base does not operate, refer to the
Troubleshooting section of this manual.
! IMPORTANT !
IF A FURNITURE DESIGN BASE DOES NOT
OPERATE, LP SENSE
CHECK FOR OBSTRUCTION TO UPHOLSTERED
SURROUND ASSEMBLY. REMOVE
OBSTRUCTION. IF NO OBSTRUCTION, AVOID
TOUCHING BASE FOR 5 SECONDS AND BASE
WILL RESET ITSELF.
STEP 8
Return base to the level position.
12
Premier Series Owners Manual 99301588-b
™
INSTALLATION
MAY BE TRIPPED.
®