Télécharger Imprimer la page

Fellowes POWERSHRED 225Ci Instructions page 4

Masquer les pouces Voir aussi pour POWERSHRED 225Ci:

Publicité

PRODUCT MAINTENANCE
CLEANING AUTO-START INFRARED SENSORS
Paper detection sensors are designed for maintenance free operation. However, on rare occasions, the sensors may become blocked by paper dust causing the motor to run
even if there is no paper present.
(Note: two paper detection sensors are located in the center of the paper entry)
TO CLEAN THE SENSORS
1
2
AUTO
Turn off and unplug
Locate Auto-start
shredder
infrared sensor
OILING SHREDDER
All cross-cut shredders require oil for peak performance. If not oiled, a machine may experience diminished sheet capacity, intrusive
noise when shredding and could ultimately stop running. To avoid these problems, we recommend you oil your shredder each time you
empty your waste bin.
FOLLOW OILING PROCEDURE BELOW AND REPEAT TWICE
2
1
AUTO
*Apply oil across entry
Press and hold forward
( ) 2-3 seconds
*Only use a non-aerosol vegetable oil in long nozzle container such as Fellowes 35250
TROUBLESHOOTING
Bin Open: The shredder will not run if the bin is open. When illuminated, close the bin to resume shredding.
Bin Full: When illuminated, the shredder waste bin is full and needs to be emptied. Use Fellowes waste bag 36054.
Remove Paper Indicator: W hen illuminated, press reverse (
SafeSense
Indicator: If hands are too close to the paper entry, the SafeSense
®
is active for 3 seconds, the shredder will automatically turn off and the user must press the power button on the control panel to resume shredding.
Self Cleaning Cycle: Shredder periodically cycles in forward and reverse lasting 3-6 seconds (225Ci only).
Go to Support Section at www.fellowes.com or see back page of manual for useful telephone numbers.
4
.
3
AUTO
Dip cotton swab in
rubbing alcohol
AUTO
) and remove paper. Reduce paper quantity to an acceptable amount and refeed into paper entry.
4
AUTO
Using cotton swab, wipe
away any contamination
from the paper sensors
15
indicator will illuminate and the shredder will stop shredding. If SafeSense
®
ENGLISH
Models 225Ci/225i
®

Publicité

loading

Ce manuel est également adapté pour:

Powershred 225i