The Following Should Be Always Observed For Safety - AERMEC MGH R410A Manuel D'installation

THE FOLLOWING SHOULD BE ALWAYS OBSERVED FOR SAFETY

• Be sure to read "THE FOLLOWING SHOULD ALWAYS BE OBSERVED FOR SAFETY" before installing
the air conditioner.
• Be sure to observe the cautions specified here as they include important items related to safety.
• The indications and meanings are as follows.
WARNING
WARNING
Could lead to death, serious injury, etc.
CAUTION
CAUTION
Could lead to serious injury in particular environments when operated incorrectly.
• After reading this manual, be sure to keep it together with the instruction manual in a handy place on the
customer's site.
Do not install it yourself (customer).
• Incomplete installation could cause injury due to
fire, electric shock, the unit falling or a leakage
of water. Consult the dealer from whom you
purchased the unit or special installer.
Install the unit securely in a place which can
bear the weight of the unit.
• When installed in an insufficient strong place,
the unit could fall causing injured.
Use the specified wires to connect the indoor and outdoor
units securely and attach the wires firmly to the terminal
board connecting sections so the stress of the wires is not
applied to the sections.
• Incomplete connecting and fixing could cause
fire.
Attach the electrical part cover to the indoor
unit and the service panel to the outdoor unit
securely.
• If the electrical part cover if the indoor unit and/or
the service panel if the outdoor unit are not
attached securely, it could result in a fire or
electric shock due to dust, water, etc.
Do not install the unit in a place where an
inflammable gas leaks.
• If gas leaks and accumulates in the area
surrounding the unit, it could cause an
explosion.
WARNING
WARNING
Perform the installation securely referring to
the installation manual.
• Incomplete installation could cause a personal
injury due to fire, electric shock, the unit falling or
a leakage of water.
Perform electrical work according to the
installation manual and be sure to use an
exclusive circuit.
• If the capacity of the power circuit is insufficient
or there is incomplete electrical work, it could
result in a fire or an electric shock.
Check that the refrigerant gas due not leak
after installation is completed.
Be sure to use the part provided or specified
parts for the installation work.
• The use of defective parts could cause an injury or leakage
of water due to a fire, electric shock, the unit falling, etc.
CAUTION
CAUTION
Perform the drainage/piping work securely
according to the installation manual.
• If there is a defect in the drainage/piping work,
water could drop from the unit and household
goods could be wet and damaged.
3