Bosch GTA 2500 W Professional Notice Originale page 20

OBJ_BUCH-854-002.book Page 20 Sunday, January 4, 2009 12:35 PM
20 | English
Assembly
Delivery Scope
Please also observe the represen-
tation of the delivery scope at the
beginning of the operating instruc-
tions.
Before assembling the saw stand, check if all
parts listed below are provided:
No. Designation
1 Attachment set
2 Saw stand with support 8
13 Upper frame with lock 3
17 Bottom frame
14 Foot lever
15 Wheel "L"
16 Wheel "R"
18 Supporting frame
19 Fastening kit
consisting of:
– Hexagon bolt
M10 x 100
M10 x 55
M10 x 50 (self-locking)
M8 x 45
M6 x 45
– Phillips screw
M8 x 50
– Washer
M10 x 29 mm
M10
M8
M6
– Lock nut
M10
M8
M6
Additionally required tools (not in delivery
scope):
– Phillips screwdriver
– Open-end spanner (10 mm, 8 mm, 6 mm)
– Adjustable spanner
1 609 929 S19 | (4/1/09)
Assembling the Mobile Stand Base
– Carefully remove all parts included in the de-
livery from their packaging.
– Remove all packaging material. (e. g. cable
ties, etc.)
– For assembly, follow figures A – E. Also ob-
serve the following notes.
For Fig. B:
The wheels are marked for easier assembly ("R"
for right wheel, "L" for left wheel).
Quantity
Note: Do not over-tighten the nuts. Parts bolted
2
together must move freely.
1
For Fig. D:
1
Observe the correct assembly direction of sup-
1
porting frame 18, which is indicated by the
1
marks "R" and "L" matching the wheels.
1
Note: Do not over-tighten the nuts. Parts bolted
1
together must move freely.
1
For Fig. E1:
In this assembly step, the saw stand 2 is bolted
together with the supporting frame rest 18 and
the upper frame rest 13.
4
– Set both rest so that the lateral recesses in
1
the rests face towards the handle.
2
– While bolting the saw stand together, take
4
care that the support 8 is always in the fix-
8
ture of the bottom frame 17.
4
Note: Only hand-tighten the nuts at first. After
all eight bolts are correctly positioned, they can
2
be firmly tightened.
10
4
For Fig. E2:
8
Note: Do not over-tighten the nuts. Parts bolted
together must move freely.
5
4
8
Bosch Power Tools