HP iPAQ Manuel De L'utilisateur page 19

All manuals and user guides at all-guides.com
To initiate pairing between the Headset and a Bluetooth mobile phone in close proximity:
1. Turn off the Headset.
2. Make certain the mobile phone is switched on.
3. Press the "Talk" button to switch on the Headset and keep the "Talk" button pressed for seven
seconds until the LED indicator alternates between blue and red. The Headset is now ready for
pairing with the mobile phone.
4. Perform a device discovery from the mobile phone. (For details on device discovery, please
consult your phone's user's guide.)
5. Once the mobile phone discovers the Headset, the text "HP Headset" appears on the
phone's screen.
6. Follow the phone instructions to accept pairing. When prompted to enter the passkey, enter the
number: 0000.
7. If time runs out after 60 seconds and the pairing fails, you will have to repeat the steps above.
You can view the status from the phone's screen.
8. On completing pairing, the phone's screen will notify you that the pairing was successful. The
LED indicator continuously flashes blue and the Headset goes into standby mode.
9. You can now make and answer calls through the Headset.
11