BALDR B0360WST4H4PR Mode D'emploi page 9

Time zone Alarm
Time
（WWVB)
AM12:00/
-5 EST
00:00 (OFF)
Barometer Calibration
● After power on, the pressure reading will be flashing for 10
seconds. If there is no need for calibration, touch the top
button to exit setting. If calibration is required, you can press
"▲/RCC " or " ▼ " button to adjust data; press and hold "▲/
RCC" or " ▼ " button will quickly change the value by 8 steps.
● If no operation within 10 seconds, it will automatically save
and exit setting.
● Barometer range: 800-1100hPa/mb (600-825 mmHg,23.62
-29.53inHg ).
RF Signal Receiving
● After barometer setting, it will start receiving outdoor sensor' s
signal for 3 minutes. If all 3 channels signal received within 3
minutes or receiving window ends, it will enter into DCF
/WWVB signal receiving window
● RF signal will not receive during the RCC reception,please
exit the RCC receiving first by pressing and holding the
" ▲/RCC " Button.
Date Date
Format Format
(DCF/MSF) (WWVB)
D/M M/D
9
Pressure Pressure
Unit Unit
(DCF) (WWVB)
hPa/mb inHg