BALDR B0360WST4H4PR Mode D'emploi page 10

WWVB/DCF Signal Receiving
1. After RF signal receiving, it will start searching radio signal
for 7 minutes with the antenna symbol displaying on screen,
Meanwhile, the backlight brightness will automatically adjust
to 3% (default brightness: 100%).
2. Once signal received, the main unit will display the received
time/month/date/weekday.
3. Daily RCC signal receiving: there are regular radio signal
receiving at UTC 7:00, 8:00, 9:00, 10:00, 11:00 each day. It
starts receiving signal at 7:00 everyday. For each day, once
signal received at any one receiving time, it will stop
receiving signal that day.
*DCF: 1:00AM,2:00AM, 3:00AM, 4:00AM, 5:00AM each day
( starts 1:00AM)
*WWVB:UTC 7:00, 8:00, 9:00, 10:00, 11:00 each day
( starts 7:00 ))
4. Manual receiving: press and hold "▲/RCC " button to enter
RCC signal receiving.
5. During receiving, press and hold "▲/RCC " button to exit
RCC receiving.
*RCC symbol display:
a. When receiving signal , RCC icon will be flashing by"1HZ".
b. When signal successfully received, LCD will display
complete RCC icon and exit RCC receiving.
c. If no signal is received, the RCC icon will disappear.
Manual Settings
1. After signal received, if there is no need for other settings,
you can just finish reading here. If there is other setting
requirements. Please check the following steps. Or if there
is no signal received, you can follow bellow steps for
manual setting.
10